Making destroyed vehicle craters out of glue

warhammer 40k vehicle crater from glue

This is a Guest Post from a fellow Old Timer.

The idea comes from The Overlords Podcast. It's how to make craters using a particular kind of glue.

I'm told it takes a few hours to do since you need to wait for the layers of glue to dry, but its not a terribly complex process in all. The idea is to have a ready made crater for when your vehicle or dreadnought gets completely obliterated. It helps to add some life to the game instead of just leaving an unused blast template there or "pretending."

What you're going to need to do this:
A piece of cardboard
A suitable vehicle for measurements
Gorilla Brand Glue
An OLD paintbrush (to spread the glue)
Your paints
X-Acto blade or knife
Some spare bits (to simulate wreckage)
Spray bottle with water
Flock material to match your basing theme

Getting started
Once you have the vehicle you want to make the crater for, you need to set it on top of your cardboard and trace its outline. It doesn't have to be exact, but you want to be close as it's a representation of the vehicle that was just there a minute ago.

That and making it about the same size will prevent any arguments with picky opponents.

vehicle crater trace on cardboard

Once you have your rough outline, it's time to get right to work with the glue. We're using Gorilla Glue (that's the brand name) for it's expansion properties. As it dries, it's going to expand and give us that crater look with the raised edges.

Adding the glue in two layers
The first layer of glue is spread inside our vehicle outline. Using your old paintbrush, give the crater a good, solid coat of glue.

glue crater application


Once the first layer of glue dries (about two hours), you can add your second layer of glue (around the outer edge of your template) and any bits you want to represent what remains of your prized vehicle after it was totaled by a lucky meltagun shot.

glue vehicle crater second pass

And here's the trick to making the second layer a bit more puffy than the first. After applying the second layer of glue, take your water bottle and give the still wet glue a few mists with water. This will push the expansion of the glue more than normal. It's another wait of 2 to 3 hours after applying the second pass of glue for it to completely dry and puff up like it should.

vehicle glue crater water spray


And the last step, a quick coat of paint
Once your second layer of glue has dried, cut your crater out from the piece of cardboard and get some paint on it. It doesn't have to be fancy, if you have a table at home, you can match that or your local game store tables.

vehicle glue crater painted

This one was given a quick spray of black and then drybrushed with GW Graveyard Earth. The bits were touched up with GW Boltgun metal so they stand out from the ground.

All in all, it's not anything that is going to change the outcome of the game, it's only going to get you the style points with an opponent and should your vehicle be sent to the Machine God in the sky, you'll have a nice marker to show where it was just a second before.

Make sure to check out these posts as they might help:
FTW Collaborative Post: Power of the Machine Spirit
Making a Dark Eldar webway portal
FTW 5th ED Guide to Armour (PDF download)
Making a vehicle disembarking template


Ron, From the WarpIf you've got any questions about something in this post, shoot me a comment and I'll be glad to answer. Make sure to share your hobby tips and thoughts in the comments below!